Now you snap the module into the cover plate and attach the cover plate to the box (figure 31).
figure 31
figure 32
The last step will be to plug in the prefabricated Cat 5 or Cat 5e cable with the male ends into the RJ45 jack module in wall plate. (figure 32)
Then connect the other end of the cable to your computer or the Auto Sensing Network Switch. Here is a example of everything installed in the wall with prefabricated Cat 5e running from the RJ45 jack in the wall plate to the NIC card in the computer (figures 33 & 34).
figure 33
figure 34
Repeat the above steps for as many modules and wall plates as your installation requires.